Bevel Scales

Bevel Boss is a ready-to-use boat builder's bevel board, designed and manufactured for easy, precise reading of bevels and miters in both standard (3"x12") and pocket (2"x8") sizes.
Durable - matte finish, alloy 430 stainless steel, .045" thickness. Easy to Read - the 3" x 12" Bevel Boss eliminates "black line fever," using generous spacing between its sharp, black etched lines and numbers. Has distinct ½ degree marks and ¼ degree dots for easy reading. Back side has a left-to-right and right-to-left 12" rule with 1/16" graduations. Precise - smooth, milled edges help keep pencil points sharp. Easy to Use - can be used with a sliding T-bevel or by itself for many operations. Helps with Machine Setup - 3" end scale makes machine setup quick and easy. Easy to Customize - non-glare satin finish accepts customizing pencil marks for a particular job.

STB312	Bevel Boss 3"x12"	$36.00
STB28	Bevel Boss 2"x8"	$27.00

Acrylic Bevel Boss

The new acrylic Bevel Boss is a laser etched green fluorescent read-through style. The read-through design allows you to read directly from the loft floor or drawings, or line up the blade of a wide variety of power tools more accurately. In addition to standard 3" x 12" it's also available in the pocket 2" x 8" size. It features the same high standards of precision as the original Bevel Boss, with generous spacing between its sharply, laser etched lines and numbers. Has distinct ½ degree marks and ¼ degree marks for easy reading. See through - picking up angles precisely from drawings. Precise - smooth, laser cut edges help keep pencil points sharp. Easy to Use - can be used with a sliding T-bevel or by itself for many operations. Helps with Machine Setup - see through for accurate alignment with saw blades.

STA312	Acrylic Bevel Boss 3"x12"	$20.00
STA28	Acrylic Bevel Boss 2"x8"	$13.50

Prinscraft

Tired of frustrating attempts at setting bevel gauge angles to an exact angle? This very handy device makes it effortless to set angles. Simply place the Bevel Scale next to the bevel gauge and adjust to the well-marked angle of choice. Marked in quarter degrees from 0 to 50 it is 3" x 12". The reverse side features a centering scale in centimeters and a left reading-right reading scale. One end of the scale has a vertical height scale, ideal for height adjustments on table saw blades or router cutters. All markings are chemically etched and highly accurate. Stainless steel. Made in Taiwan.

No Picture Available.

825-5300

Prinscraft Bevel Scale

$22.95

About Us   Contact Us   Policies  Shipping   Go to Checkout

Copyright © 2004 di legno woodshop supply, All Rights Reserved.