|
di legno |
www.dlws.com |
|
We now manufacture our very
own |
|
|
|
#2/0 Scroll Saw Blades .010" thick, 26 to 30 tpi, skip tooth German scroll saw blades (12 per pack) are the most durable, finest kerf, for the precise cutting of veneers in packet, or contour cutting of marquetry. They can be used to cut up to 16 layers of veneer at once in a good quality scroll saw such as an older model Powermatic or Delta Milwaukee 'spring top' scroll saw (my favorite). The Eclipse (a new type of vertical travel saw), Hegner, Excalabur, Dewalt or Delta scroll saw are my second choices. The reason that I like the older spring top saws is that the blade has a perfectly vertical travel. This allows one to precisely cut thick packets of veneer of up to 16 layers with a minimum of saw kerf width, and be assured that you can take all the interchangeable pieces of the veneer puzzle and assemble them back together again for a perfect fit. The double arm or pivoting arm system that most scroll saws possess have the blade moving front to back in a slightly orbital fashion and usually have no blade backing guides for precise cutting, but are still quite good for marquetry if properly used. A momentary 'on/off' foot switch is very useful when using this saw for intricate cutting, changing directions of the cut, and stopping the noise when the blade brakes. (Schürch ®)
|
|
About Us Contact Us Policies Specials Go to Checkout Copyright © 2004 di legno woodshop supply, All Rights Reserved.
|
cabinet
makers, and finish carpenters.
